K114 Continuously Variable Transmission
Shift Lever Knob
In this manual: K114 Continuously Variable Transmission
~1min read
Removal
REMOVAL
PROCEDURE
1. REMOVE SHIFT LEVER KNOB CAP
Click here![]()
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
![]() |
Remove in this direction |
(a) Release the 2 claws to disengage the shift lever knob hole cover sub-assembly as shown in the illustration.
(b) Using a screwdriver, spread the clip on the left side and remove the shift lever knob from the shift lever assembly with floor as shown in the illustration.
*1 |
Clip |
![]() |
Remove in this direction |
Components
COMPONENTS
ILLUSTRATION
*1 |
SHIFT LEVER KNOB |
*2 |
SHIFT LEVER KNOB SUB-ASSEMBLY |
Installation
INSTALLATION
PROCEDURE
1. REINSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
(a) Install the shift lever knob sub-assembly to the shift lever assembly with floor.
(b) Engage the 2 claws to attach the shift lever knob hole cover sub-assembly.
2. REINSTALL SHIFT LEVER KNOB CAP
Click here![]()
Was this page helpful?
.png)