Audio / Video

Installation

~1min read

INSTALLATION

PROCEDURE

1. INSTALL RADIO RECEIVER BRACKET NO. 2

(a) Install the radio receiver bracket No. 2 to the radio and display receiver assembly using 2 screws.

2. INSTALL RADIO RECEIVER BRACKET NO. 1

(a) Install the radio receiver bracket No. 1 to the radio and display receiver assembly using 2 screws.

3. INSTALL CENTER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

(a) Engage the claws to install the center instrument panel finish panel sub-assembly.

4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(a) Connect each connector.

(b) Engage the clips and claws to install the radio and display receiver assembly with bracket, as shown in the illustration.

Install in this direction

(c) Install the 4 screws.

5. INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

Click here

6. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

Click here

7. INSTALL INSTRUMENT PANEL FINISH PANEL GARNISH ASSEMBLY

Click here