Electrical Distribution
Installation
In this manual: Electrical Distribution
~1min read
INSTALLATION
PROCEDURE
1. INSTALL NO. 1 INTEGRATION RELAY
(a) Connect the 2 connectors.
(b) Engage the claws to install the No. 1 integration relay, as shown in the illustration.
![]() |
Install in this direction |
2. INSTALL NO. 1 RELAY BLOCK COVER
(a) Engage the claws to install the No. 1 relay block cover, as shown in the illustration.
![]() |
Install in this direction |
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When the cable has been disconnected, some systems must be reset after the cable is reconnected.
Click here
![]()
Was this page helpful?
.png)