Meters / Gauges / Display
Symptom Table
In this manual: Meters / Gauges / Display
~1min read
SYMPTOM TROUBLESHOOTING TABLE
HINT:
- Use the table below to determine the cause of the symptoms. If several suspected areas are listed, the possible causes of the symptom are shown in order of probability in the "Suspected Area" column of the table. Check each symptom, verifying the suspected areas in the order listed. Replace parts if necessary.
- Check the fuses and relays associated with this system before checking the suspected areas listed below.
Symptom | Suspected Area | Link |
|---|---|---|
Clock does not operate at all |
Combination Meter Assembly |
|
Wire harness or connector |
- |
|
Clock display illumination malfunction |
Combination Meter Assembly |
|
Wire harness or connector |
- |
|
Clock runs fast or slow |
Combination Meter Assembly |
|
Clock cannot be adjusted |
Combination Meter Assembly |
Was this page helpful?