Seat Belt
Inspection
In this manual: Seat Belt
~1min read
INSPECTION
PROCEDURE
1. INSPECT REAR CENTER SEAT BELT OUTER BELT ASSEMBLY
(a) Before installing the rear center seat belt outer belt assembly, check the ELR function. NOTICE: Do not disassemble the retractor. (1) When the retractor inclination is between 0° and 20°, make sure the belt can be pulled out of the retractor. When the retractor inclination is less than 0° or more than 20°, make sure the belt locks. If the result is not as specified, replace the rear center seat belt outer belt assembly. |
|
Was this page helpful?
