Interior Light

Inspection

~1min read

INSPECTION

PROCEDURE

1. INSPECT INSTRUMENT CLUSTER FINISH PANEL GARNISH

(a) Check that the LED lights up.

(1) Apply battery voltage to the instrument cluster finish panel garnish and check that the LED illuminates.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → 2 (B)

Battery negative (-) → 1 (E)

LED lights up

If the result is not as specified, replace the instrument cluster finish panel garnish.

*a

Component without wire harness connected (instrument cluster finish panel garnish)

2. INSPECT INSTRUMENT CLUSTER FINISH PANEL CENTER GARNISH

(a) Check that the LED lights up.

(1) Apply battery voltage to the instrument cluster finish panel center garnish and check that the LED illuminates.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → 2 (B)

Battery negative (-) → 1 (E)

LED lights up

If the result is not as specified, replace the instrument cluster finish panel center garnish.

*a

Component without wire harness connected (instrument cluster finish panel center garnish)