Supplemental Restraint Systems

Inspection On Vehicle

~1min read

INSPECTION ON VEHICLE

PRECAUTION / NOTICE / HINT

CAUTION:

Make sure to follow the correct removal and installation procedures for the rear seat airbags.

PROCEDURE

1. INSPECT REAR SEAT AIRBAG (for vehicle not involved in collision)

(a) Perform a diagnostic system check.

Click here

(b) Check for any defects in the rear seat airbags installed on the vehicle.

HINT:

Defects include the following:

  • Cuts on the rear seat side garnish near the rear seat airbags
  • Small cracks on the rear seat side garnish near the rear seat airbags
  • Significant discoloration on the rear seat side garnish near the rear seat airbags

OK:

There are no defects.

If a defect is detected, replace the rear seat side garnish with a new one.

2. INSPECT REAR SEAT AIRBAG (for vehicle involved in collision but airbag not deployed)

(a) Perform a diagnostic system check.

Click here

(b) Check for any defects in the rear seat airbags removed from the vehicle.

HINT:

Defects include the following:

  • Cuts
  • Small cracks
  • Significant discoloration
  • Cracks or other damage to the connector
  • Deformation or cracks on the rear seat side garnish

OK:

There are no defects.

If a defect is detected, replace the rear seat airbag and the rear seat side garnish with new ones.