Ignition System
Separate Ignition Coil System
In this manual: Ignition System
~1min read
· With the ignition switch off, disconnect the low-tension wires from the ignition coil mounted on the bulkhead.
· Disconnect the high-tension cable from the coil.
· Connect an ohmmeter to the low-tension terminals of the coil and check that the resistance is as specified in the "Specifications".
· Connect an ohmmeter to the positive low-tension terminal and to the high-tension terminal, and check again that the resistance is as specified.
· If the resistance differs from the specified value, replace the coil.
· Restore the wiring.
Test yourself
A quick Toyota Carina quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?