Vehicle Exterior
Back Door Weatherstrip
In this manual: Vehicle Exterior
~1min read
Removal
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
BACK DOOR WEATHERSTRIP |
67881A |
- |
- |
|
● |
Non-reusable part |
- |
- |
PROCEDURE
1. REMOVE BACK DOOR WEATHERSTRIP
![]() |
Non-drying Sealer |
- |
- |
(1) Remove the back door weatherstrip.
(2) Remove any non-drying sealer on the body with non-residue solvent.
Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
BACK DOOR WEATHERSTRIP |
67881A |
- |
- |
|
● |
Non-reusable part |
- |
- |
PROCEDURE
1. INSTALL BACK DOOR WEATHERSTRIP
*a |
Paint Mark |
*b |
Mark Position |
(1) Align the paint marks with the positions on the body flange and install a new back door weatherstrip.
Paint Mark (w/ Power Back Door)Location | Color |
|---|---|
Center |
Yellow |
Side |
White |
Location | Color |
|---|---|
Center |
Light Blue |
Side |
White |
NOTICE:
- Make sure to position the paint mark correctly during installation. Failure to do so may lead to water ingress.
- After installation, check that the corners fit correctly.
HINT:
Make sure to install the parts of the back door weatherstrip near the joint and paint mark shown in the illustration first, and then install the corners.
Was this page helpful?
.png)
.png)
.png)
.gif)

.png)
.png)
.png)
.gif)