Blower Motor does not Operate
DESCRIPTION
If air does not flow from the front registers after the blower switch on the air conditioning control assembly is operated, the following factors may be the cause.
Symptom | Factor |
|---|---|
Blower motor does not operate at all
|
|
PROCEDURE
CHECK AIR CONDITIONING SYSTEM (MANUAL MODE)
(a) Turn off the AUTO switch, operate the blower switch and check that the blower motor with fan sub-assembly can be operated manually.
OK:
The blower motor with fan sub-assembly operates normally.
| NG | GO TO OTHER DIAGNOSIS PROCEDURE (Blower Motor Circuit) |
|
READ VALUE USING GTS
(a) Read the Data List according to the display on the GTS.
Powertrain > Engine > Data ListTester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
Coolant Temperature |
Engine coolant temperature |
Min.: -40°C (-40°F), Max.: 140 °C |
75 to 100 °C: After warming up |
This is the engine coolant temperature. HINT:
|
Coolant Temperature
OK:
After warming up the engine, the temperature value displayed is within the range specified in the normal condition column.
| OK | REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY |
| NG | GO TO COOLING SYSTEM |