Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
NOTICE:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- The air conditioning system uses the CAN communication system. First, confirm that there is no malfunction in the CAN communication system. Refer to the How to Proceed with Troubleshooting procedure.
Click here
.gif)
- Perform the inspection when the vehicle is at ambient temperature. If this is not done, there could be a risk of injury depending on the location being inspected.
VEHICLE CHECK ITEMS
HINT:
- You can reduce the number of systems to check by using the results of the following operation check.
- Perform the following checks based on Customer Feedback and the vehicle condition.
- The customer's opinion may not be consistent with the actual problem (eg: the cooling performance of the air conditioner is bad → actually, the wind volume is weak). It is important to check the problem symptoms accurately and judge correctly based on various sources of information.
- Judgment as to whether the air conditioner panel is normal or abnormal can be judged by checking if the indicator illuminates or turns off when the switch is operated.
- During servo motor initialization, the AUTO indicator light comes on, and then goes off when initialization has finished.
- If the performance of the air conditioner is poor or there is a foul odor, check for clogging in the clean air filter.
Malfunction Operation/Function:
Common Function of Cool and Heater Function | Only Cool Air Function | Only Heater Function | Suspected Area |
|||
|---|---|---|---|---|---|---|
A/C Switch Operation | Blower Operation | Recirculation/Fresh Function | Air Outlet Changing Function |
|||
x |
o |
o |
o |
x |
x |
Go to "Problem Symptoms Table: Air Conditioning Control" |
o |
o |
o |
o |
x |
o |
Go to "Problem Symptoms Table: Cooling Function" |
o |
o |
o |
o |
o |
x |
Go to "Problem Symptoms Table: Heater Function" |
o |
x |
o |
o |
x |
x |
Go to "Problem Symptoms Table: Blower Control" |
o |
o |
x |
o |
x |
x |
Go to "Problem Symptoms Table: Air Inlet Control" |
o |
o |
o |
x |
x |
x |
Go to "Problem Symptoms Table: Air Outlet Control" |
x |
x |
x |
x |
x |
x |
Air Conditioning Amplifier Assembly or Air Conditioning Assembly is Defective |
AIR CONDITIONING CONTROL
Symptom | Suspected Area | Link |
|---|---|---|
Air conditioning system cannot be operated using air conditioning control assembly
|
|
|
Air conditioning system cannot be operated using air conditioning control assembly
|
Air conditioning control assembly |
|
Air conditioning system cannot be operated using air conditioning control assembly immediately after starting the engine
|
Refer to "INITIALIZATION" |
|
A/C switch indicator does not illuminate |
|
COOLING FUNCTION
Symptom | Suspected Area | Link |
|---|---|---|
No cool air comes out
|
|
|
|
|
|
Temperature of outlet air is cooler on left or right side*1
|
|
- *1: for Dual Type
HEATER FUNCTION
Symptom | Suspected Area | Link |
|---|---|---|
|
|
|
Temperature of outlet air is warmer on left or right side*1
|
|
- *1: for Dual Type
BLOWER CONTROL
Symptom | Suspected Area | Link |
|---|---|---|
Blower motor does not operate at all
|
|
|
Airflow volume cannot be changed |
|
|
|
|
AIR INLET CONTROL
Symptom | Suspected Area | Link |
|---|---|---|
|
|
|
|
|
AIR OUTLET CONTROL
Symptom | Suspected Area | Link |
|---|---|---|
Air outlet mode cannot be changed
|
|
|
Air outlet mode cannot be changed
|
Air conditioning control assembly |
DEFROSTER CONTROL
Symptom | Suspected Area | Link |
|---|---|---|
Windshield frequently fogs up |
|