Engine & Hybrid System
Inspection
In this manual: Engine & Hybrid System
~1min read
INSPECTION
PROCEDURE
1. INSPECT FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID MAIN VALVE ASSEMBLY)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
1 - 2 |
20 °C |
29 to 30 Ω |
If the result is not as specified, replace the fuel vapor containment valve (fuel tank solenoid main valve assembly).
Was this page helpful?