Engine & Hybrid System

Installation

~2min read
0102030405097N·mlb·ft
Tightening torque found on this page

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID MAIN VALVE ASSEMBLY)

77070A

-

-

-

2

FUEL TANK VENT HOSE SUB-ASSEMBLY

77404A

-

-

3

NO. 2 FUEL TANK VENT HOSE SUB-ASSEMBLY

77404B

-

-

4

REAR SUSPENSION MEMBER SUB-ASSEMBLY

51206A

-

-

-

N*m (kgf*cm, ft.*lbf): Specified torque

-

-

PROCEDURE

1. INSTALL FUEL VAPOR CONTAINMENT VALVE (FUEL TANK SOLENOID MAIN VALVE ASSEMBLY)

Torque:

9 N·m {92 kgf·cm, 80 in·lbf}

2. CONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY

*a

Retainer

-

-

Push in

-

-

(1) Connect the fuel tank vent hose sub-assembly to the fuel vapor containment valve (fuel tank solenoid main valve assembly).

Click here

NOTICE:

  • Check that there are no scratches or foreign matter around the connecting parts of the fuel tank vent hose sub-assembly and fuel vapor containment valve (fuel tank solenoid main valve assembly) before performing this work.
  • After connecting the fuel tank vent hose sub-assembly, check that the fuel tank vent hose sub-assembly are securely connected by pulling on the fuel tank vent hose sub-assembly.

3. CONNECT NO. 2 FUEL TANK VENT HOSE SUB-ASSEMBLY

*a

Retainer

-

-

Push in

-

-

(1) Connect the No. 2 fuel tank vent hose sub-assembly to the fuel vapor containment valve (fuel tank solenoid main valve assembly).

Click here

NOTICE:

  • Check that there are no scratches or foreign matter around the connecting parts of the No. 2 fuel tank vent hose sub-assembly and fuel vapor containment valve (fuel tank solenoid main valve assembly) before performing this work.
  • After connecting the No. 2 fuel tank vent hose sub-assembly, check that the No. 2 fuel tank vent hose sub-assembly are securely connected by pulling on the No. 2 fuel tank vent hose sub-assembly.

4. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

Click here