Vehicle Interior
On-vehicle Inspection
In this manual: Vehicle Interior
~1min read
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT COOLER CONDENSER ASSEMBLY
(a) If the cooler condenser assembly fins are dirty, clean them with water and dry them with compressed air.
NOTICE:
Do not damage the cooler condenser assembly fins.
(b) If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers.
2. INSPECT FOR REFRIGERANT LEAK
(a) Using a halogen leak detector, check the pipe joints for refrigerant leaks.
(b) If a refrigerant leak is detected in a joint, check the torque of the bolt of the joint.
Was this page helpful?