Vehicle Interior
Reassembly
In this manual: Vehicle Interior
~1min read
REASSEMBLY
COMPONENTS (REASSEMBLY)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
COOLER DRYER |
- |
- |
- |
|
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
![]() |
for Gasoline Model: Compressor oil ND-OIL 12 or equivalent for HEV Model: Compressor oil ND-OIL 11 or equivalent |
- |
- |
PROCEDURE
1. INSTALL COOLER DRYER
*a |
Modulator |
*b |
Cap |
(1) Using pliers, install a new cooler dryer to the modulator.
(2) Sufficiently apply compressor oil to 3 O-rings and the fitting surfaces of a new cap.
Compressor Oil:
for Gasoline Model:
ND-OIL 12 or equivalent
for HEV Model:
ND-OIL 11 or equivalent
NOTICE:
Keep the O-rings and O-ring fitting surfaces free from dirt or foreign matter.
(3) Using a 14 mm straight hexagon, install the cap to the modulator.
Torque:
4 N·m {41 kgf·cm, 35 in·lbf}
Was this page helpful?
.png)
.png)
.png)
.gif)
.png)
.png)