Vehicle Interior

Vanity Light

~1min read

Removal

REMOVAL

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

VANITY LIGHT ASSEMBLY

81340

-

-

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE VANITY LIGHT ASSEMBLY

(1) Using a moulding remover A, disengage the claw to remove the vanity light assembly.

(2) Disconnect the connector.

Inspection

INSPECTION

PROCEDURE

1. INSPECT VANITY LIGHT ASSEMBLY (for LH Side)

(a) Check the illumination.

(1) Apply auxiliary battery voltage to the vanity light assembly and check that the lights illuminate.

OK:

Tester Connection

Specified Condition

T27-4 (B) - Auxiliary battery positive (+)

T27-2 (E) - Auxiliary battery negative (-)

Vanity light illuminates

If the result is not as specified, replace the vanity light assembly.

*a

Component without harness connected

(Vanity Light Assembly)

2. INSPECT VANITY LIGHT ASSEMBLY (for RH Side)

(a) Check the illumination.

(1) Apply auxiliary battery voltage to the vanity light assembly and check that the lights illuminate.

OK:

Tester Connection

Specified Condition

T26-4 (B) - Auxiliary battery positive (+)

T26-2 (E) - Auxiliary battery negative (-)

Vanity light illuminates

If the result is not as specified, replace the vanity light assembly.

*a

Component without harness connected

(Vanity Light Assembly)

Installation

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

VANITY LIGHT ASSEMBLY

81340

-

-

-

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. INSTALL VANITY LIGHT ASSEMBLY