On–vehicle inspection

1. 1
   remove the front wheel.
2. 2
   separate the front disc brake caliper assy .
3. 3
   remove the front disc.
4. 4
   inspect the bearing backlash.

   

5. 5
   Using a dial indicator, check the backlash near the center of the axle hub.

   Maximum: 0.05 Mm (0.0020 In.)

If the backlash exceeds the maximum, replace the front axle hub bearing.

1. 1
   inspect the axle hub deviation.

   

2. 2
   Using a dial indicator, check the deviation at the surface of the axle hub outside the hub bolt.

   Maximum: 0.05 Mm (0.0020 In.)

If the backlash exceeds the maximum, replace the front axle hub sub–assy.

1. 1
   install the front disc.
2. 2
   install the front disc brake caliper assy .
3. 3
   install the front wheel.

   Torque: 103 nvm (1,050 Kgf·cm, 76 ft·lbf)

1. 1
   remove the rear wheel.
2. 2
   remove rear brake drum sub–assy.
3. 3
   inspect the bearing backlash.

   

4. 4
   Set a dial indicator near the center of the axle hub and check the backlash in the bearing shaft sirection.

   Maximum: 0.05 Mm (0.0020 In.)

If the backlash exceeds the maximum, replace the rear axle hub & bearing assy.

1. 1
   Inspect the axle hub deviation.

   

2. 2
   Using a dial indicator, check the deviation at the surface of the axle hub outside the hub bolt.

   Maximum: 0.07 Mm (0.0028 In.)

If the backlash exceeds the maximum, replace the rear axle hub & bearing assy.

1. 1
   install the rear brake drum sub–assy.
2. 2
   install the rear wheel.

   Torque: 103 nvm (1,050 Kgf·cm, 76 ft·lbf)