On–vehicle inspection

1. Install lspv gauge (sst) and bleed air

1. 1
   remove the bleeder plugs from the front and rear brake cylinder.
2. 2
   install the lspv gauge (sst), and bleed the air.

   Sst 09709–29018

2. Raise master cylinder pressure and check rear wheel cylinder pressure

Hint

: when inspecting the fluid pressure, inspect the left front and right rear together, and the right front and left rear together.

If the rear wheel cylinder pressure is imprper, replace the proportioning valve assy. 3. Remove lspv gauge (sst)

1. 1
   remove the lspv gauge (sst).

   Sst 09709–29018

2. 2
   install the bleeder plugs.

   Torque: 8.3 Nvm (85 Kgf·cm, 74 in.Vlbf)

4. Bleed master cylinder

sst 09023–00100

5. Bleed brake line 6. Check for leaks