Starting
Removal
In this manual: Starting
~1min read
1. REMOVE V-BANK COVER
2. REMOVE INTAKE AIR CONNECTOR
3. REMOVE INTAKE MANIFOLD ASSEMBLY (EM-35 )
4. REMOVE STARTER

(a) Remove the 2 bolts holding the starter from the cylinder block.
(b) Disconnect the starter from the cylinder block.

(c) Disconnect the starter connector.
(d) Remove the nut, bolt and disconnect the starter wire.
(e) Remove the bolt, and disconnect the engine wire protector from the starter.
(f) Remove the starter.
Test yourself
A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?