2Az-fe ignition
Disassembly
In this manual: 2Az-fe ignition
14steps
~84min
3/5difficulty
Done 0 of 14
- Remove magnetic switch assembly
- Remove the nut and disconnect the lead wire from the magnetic switch.

- Remove the 2 screws holding the magnetic switch to the starter drive housing.
- Remove the magnetic switch.
- Remove the return spring and plunger from the starter drive housing.

- Remove starter yoke assembly

- Remove the 2 through-bolts, and pull out the starter yoke together with the commutator end frame.
- Remove the starter yoke from the commutator end frame.

- Remove starter armature plate

- Remove the armature plate from the starter yoke.
- Remove starter commutator end frame cover

- Using a screwdriver, pry out the commutator end frame cover.
- Remove starter armature assembly

- Using snap ring pliers, remove the snap ring and plate washer.
- Remove the armature from the commutator end frame.
- Remove planetary gear

- Remove the 3 planetary gears from the starter drive housing.
Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?