Installation

1. 1
   Install starter assembly
2. 2
   Install the starter with the 2 bolts.

   

Torque: 37 n*m (377 kgf*cm, 27 ft.*Lbf)

1. 1
   Connect the starter connector.
2. 2
   Install the terminal nut and cover the nut with the cap.

Torque: 9.8 N*m (100 kgf*cm, 7 ft.*Lbf)

2. Install battery bracket reinforcement

1. Install the bracket reinforcement.

Torque: 19 n*m (194 kgf*cm, 14 ft.*Lbf)

3. Install front battery bracket

1. Install the bracket front with the 4 bolts.

Torque: 19 n*m (194 kgf*cm, 14 ft.*Lbf)

Attach the 2 wire harness clamps.

1. 1
   Install battery
2. 2
   Install battery insulator
3. 3
   Install battery clamp

   

1. 1
   Attach the hook of the battery clamp to the battery bracket front.
2. 2
   Temporarily tighten the nut and install the bolt.
3. 3
   Adjust the battery clamp's position.
4. 4
   Fully tighten the nut and bolt.

Torque: 5.0 N*m (51 kgf*cm, 44 in.*Lbf)

Attach the 2 wire harness clamps.

1. 1
   Connect cable to positive battery terminal
2. 2
   Connect cable to negative battery terminal