2Az-fe ignition
Removal
In this manual: 2Az-fe ignition
16steps
~96min
4/5difficulty
Done 0 of 16
- Disconnect cable from negative battery terminal
- Disconnect cable from positive battery terminal
- Remove battery clamp
- Remove the bolt and loosen the nut.
- Detach the 2 wire harness clamps.
- Detach the hook of the battery clamp from the battery bracket front, and then remove the battery clamp.

- Remove battery insulator
- Remove battery
- Remove front battery bracket

- Detach the 2 wire harness clamps.
- Remove the 4 bolts and bracket front.
- Remove battery bracket reinforcement

- Remove the 2 bolts and reinforcement bracket.
- Remove starter assembly

- Disconnect the starter connector.
- Open the terminal cap, remove the nut and disconnect the starter wire.
- Remove the 2 bolts and starter.

Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?