Toyota RAV4 Quiz
Introduction

For vehicles equipped with mobile communication systems

In this manual: Introduction
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
5steps
~30min
2/5difficulty
Done 0 of 5
Toyota RAV4. For vehicles equipped with mobile communication systems

  1. Install the antenna as far away from the ecu and sensors of the vehicle electronic systems as possible.
  2. Install an antenna feeder at least 20 cm (7.87 In.) Away from the ecu and sensors of the vehicle electronic systems. For details about ecu and sensor locations, refer to the section of the applicable components.
  3. Keep the antenna and feeder separate from other wiring as much as possible. This will prevent signals of the communication equipment from affecting vehicle equipment and vice versa.
  4. Check that the antenna and feeder are correctly adjusted.
  5. Do not install a high-powered mobile communication system.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.