Toyota RAV4 Quiz
Introduction

Handling of hose clamps

In this manual: Introduction
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
4steps
~24min
2/5difficulty
Done 0 of 4
Toyota RAV4. Handling of hose clamps

  1. Before removing the hose, check the clamp position so that it can be reinstalled in the same position.
  2. Replace any deformed or dented clamps with new ones.
  3. When reusing a hose, attach the clamp on the clamp track portion of the hose.
  4. For a spring type clamp, you may want to spread the tabs slightly after installation by pushing in the direction of the arrows as shown in the illustration.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.