Fuel pressure pulsation damper

1. 1
   Discharge fuel system pressure (see page fu-9)
2. 2
   Disconnect cable from negative battery terminal
3. 3
   Remove no. 1 Engine cover (see page es-410)
4. 4
   Remove air cleaner cap sub-assembly (see page es-411)
5. 5
   Disconnect fuel main tube (see page fu-10)
6. 6
   Remove fuel pressure pulsation damper assembly

   

1. Remove the 2 bolts and fuel pressure pulsation damper.

1. Install fuel pressure pulsation damper assembly

1. Apply a light coat of gasoline or spindle oil to the oring of the fuel pressure pulsation damper.

2. Install the fuel pressure pulsation damper with the 2 bolts.

Make sure that the o-ring is not cracked or jammed when installing.

1. 1
   Install fuel main tube (see page fu-14)
2. 2
   Install air cleaner cap sub-assembly (see page es-413)
3. 3
   Install no. 1 Engine cover (see page es-414)
4. 4
   Connect cable to battery negative terminal
5. 5
   Check for fuel leaks (see page fu-14)