Installation

A bolt without a torque specification is shown in the standard bolt chart (see page ss-2).

1. Install front seat inner belt assembly (for power seat)

1. Install the front seat inner belt assembly with the nut.

Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.

1. 1
   For driver seat: attach the 2 clamps and connect the 2 connector.
2. 2
   For passenger seat: attach the clamp and connect the 2 connector.
3. 3
   Install front seat inner belt assembly (for manual seat)

   

1. Install the front seat inner belt assembly with the nut.

Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.

1. 1
   For driver seat: attach the 3 clamps and connect the 2 connector.
2. 2
   For passenger seat: attach the 2 clamps and connect the connector.
3. 3
   Install front seat cushion inner shield lh (see page se-21)
4. 4
   Install front seat cushion inner shield rh (see page se-21)
5. 5
   Install front seat assembly (for power seat) (see page se-27)
6. 6
   Install front seat assembly (for manual seat) (see page se-11)
7. 7
   Install front seat track bracket outer cover lh (see page se-23)
8. 8
   Install front seat track bracket inner cover lh (see page se-23)
9. 9
   Install front seat track bracket inner cover rh
10. 10
    Use the same procedures described for the lh side.
11. 11
    Install front seat track bracket outer cover rh
12. 12
    Use the same procedures described for the lh side.
13. 13
    Connect cable to negative battery terminal