Toyota RAV4 Quiz
Seat belt

Removal

In this manual: Seat belt
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
17steps
~102min
4/5difficulty
Done 0 of 17
  1. Disconnect cable from negative battery terminal
Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  1. Remove front seat track bracket outer cover lh (see page se-11)
  2. Remove front seat track bracket inner cover lh (see page se-11)
  3. Remove seat track bracket cover outer front rh
  4. Use the same procedures described for the lh side.
  5. Remove seat track bracket cover inner front rh
  6. Use the same procedures described for the lh side.
  7. Remove front seat assembly (for power seat) (see page se-27)
  8. Remove front seat assembly (for manual seat) (see page se-11)
  9. Remove front seat cushion shield rh (for power seat) (see page se-29)
  10. Remove front seat cushion inner shield lh (for manual seat) (see page se-13)
  11. Remove front seat inner belt assembly (for power seat)
  12. For driver seat: disconnect the 2 connectors and detach the 2 clamps.
  13. For passenger seat: disconnect the connector and detach the 2 clamps.
  14. Remove the nut and seat belt
  15. Remove front seat inner belt assembly (for manual seat)
    Toyota RAV4. Remove front seat inner belt assembly (for manual seat)

  1. For driver seat: disconnect the 2 connectors and detach the 3 clamps.
  2. For passenger seat: disconnect the connector and detach the 2 clamps.
    Toyota RAV4. Remove front seat inner belt assembly (for manual seat)

  1. Remove the nut and seat belt.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.