Toyota RAV4 Quiz
2Az-fe engine mechanical

Installation

In this manual: 2Az-fe engine mechanical
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
5steps
~35min
3/5difficulty
1special tools
Done 0 of 5
  1. Install fan and generator v belt
Toyota RAV4. Install fan and generator v belt

  1. Using sst and 19 mm socket wrench, loosen the vribbed belt tensioner arm clockwise, then install the fan and generator v belt.
Sst 09216-42010 Notice:
  • Be sure to connect sst and the tools so that they are in line during use.
  • When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
  • After the tensioner is fully retracted, do not apply force any more than necessary.
  1. Install front suspension member reinforcement rh
  2. Install the reinforcement rh with the 4 bolts.

    Torque: 96 n*m (979 kgf*cm, 71 ft.*Lbf)

  3. Install front fender apron rh
  4. Install front wheel rh
  5. Install radiator support opening cover

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.