2Az-fe engine mechanical

Integration relay

~1min read
On-vehicle inspection
  1. Disconnect cable from negative battery terminal
Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  1. Inspect integration relay
Notice:
  • The efi relay is built into the integration relay (unit a: efi main).
  • Some relays are built into the integration relay.
The integration relay cannot be disassembled. If there is a malfunction in the circuit of the integration relay, replace the integration relay.
  1. Using a screwdriver, detach the 2 claws and disconnect the integration relay from the no. 1 Engine room junction block.
Hint:

Tape the screwdriver tip before use.

  1. Disconnect the 3 connectors from the integration relay.
Toyota RAV4. Inspect integration relay

  1. Inspect the efi relay.
Toyota RAV4. Inspect integration relay

  1. Check the resistance of the efi main fuse.
If the result is not as specified, replace the efi main fuse.
  • Measure the resistance of the integration relay.
  • Standard resistance
    Toyota RAV4. Inspect integration relay

    If the result is not as specified, replace the integration relay.

    1. Connect cable to negative battery terminal

    Test yourself

    A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.