Toyota RAV4 Quiz
2Az-fe engine mechanical

Installation

In this manual: 2Az-fe engine mechanical
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
8steps
~53min
3/5difficulty
1special tools
Done 0 of 8
  1. Install engine coolant temperature sensor
  2. Install a new gasket onto the sensor.
  3. Using sst, install the sensor.
Sst 09817-33190 torque: 19.6 N*m (200 kgf*cm, 14 ft.*Lbf)
  1. Connect the sensor connector.
Toyota RAV4. Installation

  1. Install air cleaner case (see page es-431)
  2. Install air cleaner cap (see page es-413)
  3. Connect cable to negative battery terminal
  4. Add engine coolant (see page co-6)
  5. Check for coolant leakage (see page co-1)

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.