Toyota RAV4 Quiz
2Az-fe engine mechanical

On-vehicle inspection

In this manual: 2Az-fe engine mechanical
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
6steps
~36min
2/5difficulty
Done 0 of 6
  1. Check accelerator pedal rod
Toyota RAV4. Check accelerator pedal rod

  1. Check the voltage.
  2. Connect the intelligent tester to the dlc3.
  3. Turn the ignition switch on
  4. Turn the intelligent tester on.
  5. Select the menu items: diagnosis / enhanced obd ii / data list / all / accel pos #1, accel pos #2.
  6. Operate the accelerator pedal, and then check that the accel pos #1 and accel pos #2 values are within the specifications.
Standard voltage (accel pos #1)
Standard voltage (accel pos #2)

If the result is not as specified, check the accelerator pedal rod, wire harness or ecm.

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.