Settings display

Vehicle settings and the content displayed on the screen can be changed by using the meter control switches.

■ Setting procedure

1. Press and hold to display
the cursor on the content display area (center).

2. Press or
with the cursor
on the content display area (center) to select and then press .

3. Press or
of the meter
control switches and move the cursor to select the item for changing settings.

If the function is turned on and off or the volume, etc. is changed on the setting screen, the setting is changed each time is pressed .

For functions that allow operation contents, display contents, etc., of function to be selected, the setting screen is displayed by pressing and holding . When the setting
screen is displayed, select the setting or desired value (time, etc.) with .

4. After changing the settings, press of the meter control
switches.

■ LTA (Lane Tracing
Assist)

Select to set up the following items.

• "Lane Center"

Select to enable/disable the lane centering function.

• "Sensitivity"

Select to set the lane departure alert sensitivity.

• "Sway Warning"

Select to enable/disable the vehicle sway warning.

• "Sway Sensitivity"

Select to set the vehicle sway warning sensitivity.

■ BSM (Blind Spot Monitor)
(if equipped)

Select to set up the following items.

• BSM (Blind Spot Monitor) on/off
  Select to enable/disable the BSM system.
• "Sensitivity"
  Select to change the alert timing for an approaching vehicle.
• "Brightness"
  Select to switch the brightness of the outside rear view mirror indicators.

■ PCS (Pre-Collision System)

Select to set up the following items.

• PCS on/off
  Select to enable/disable the pre-collision system.
• "Sensitivity"
  Select to change the pre-collision warning timing.

■ (Intuitive parking
assist) (if equipped)

Select to set up the following items.

• Intuitive parking assist on/off Select to enable/disable the Intuitive parking assist.
• "Volume"
  Select to set the volume of the buzzer which sounds when the Intuitive parking assist is operated.

■ RCTA (Rear Cross Traffic
Alert) (if equipped)

Select to set up the following items.

• RCTA (Rear Cross Traffic Alert) on/off
  Select to enable/disable the RCTA system.
• "Volume"
  Select to set the volume of the buzzer which sounds when the RCTA system is operated.

■ PKSB (Parking Support
Brake System) (if equipped)

Select to enable/disable the Parking Support Brake function.

■ RSA (Road Sign Assist)
(if equipped)

Select to set up the following items.

• Road Sign Assist on/off Select to enable/disable the RSA system.
• "Notification Method" Select to change each notification method used to notify the driver when the system recognizes excess speed and Do Not Enter sign.
• "Notification Level" Select to change each notification level used to notify the driver when the system recognizes a speed limit sign.

■ Vehicle Settings

• PBD (Power Back Door)
  (if equipped)

Select to set up the following items.

• System settings
  Select to enable/disable the power back door system.
• "Hands Free"*
  Select to enable/disable the Hands Free Power Back Door.
• "Opening Adjustment" Select the open position when power back door is fully open.
• "Volume"
  Select to set the volume of the buzzer which sounds when the power back door system operates.

*: Vehicles with Hands Free Power Back Door

• Stop & Start system (if
  equipped)

Select to set the length of time the Stop & Start system will operate when the "A/C" switch of the air conditioning system is on.

• "Scheduled Maintenance" Select to reset the scheduled maintenance information (message indicating maintenance is required and distance until the next maintenance) after all maintenance is performed.
• Rear Seat Reminder
  Select to enable/disable the rear seat reminder function.
• "TPWS" (Tire Pressure Warning System)

• "Set Pressure"
  Select to initialize the tire pressure warning system.
• "Change Wheel"
  Select to change the tire pressure warning system sensor ID code set. To enable this function, a second set of tire pressure warning system sensor ID codes must be registered by a Toyota dealer.

  For information regarding changing the registered ID code set, contact your Toyota dealer.

■ Settings

• "Language"
  Select to change the language on the multi-information display.
• "Units"
  Select to change the unit of measure for fuel consumption.
• Meter Type
  Select to change the meter type setting.
• Meter Style
  Select to change the meter style.
• Dial Type
  Select to change dial type.
• (Eco Driving Indicator
  Light)

Select to activate/deactivate the Eco Driving Indicator Light.

• Fuel Economy
  Select to change the display on Fuel Economy.
• Drive Info
  Select to change displayed items on drive information display.
• Pop-Up Display
  Select to enable/disable the pop-up displays, which may appear in some situations.
• Default Settings
  Select to reset the meter display settings.

■Suspension of the settings display

• In the following situations, operation of the settings display will be temporarily suspended.
  • When a warning message appears on the multi-information display
  • When the vehicle begins to move
• Settings for functions not equipped to the vehicle are not displayed.
• When a function is turned off, the related settings for that function are not selectable.

WARNING

■Cautions during setting up the display

As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation.

In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle.

This may lead to death or a serious health hazard.

NOTICE

■During setting up the display

To prevent battery discharge, ensure that the engine is running while setting up the display features.

Warning message display

Select to display warning messages and measures to be taken if a malfunction is detected.

Convenience Services (Suggestion function)

Displays suggestions to the driver in the following situations.

To select a response to a displayed suggestion, use the meter control switches.

■ Suggestion to turn off the headlights

If the headlights are left on for a certain amount of time after the engine switch has been turned off, a suggestion message will be displayed.

When the headlight switch is in the AUTO position: The message asking if you wish to turn the headlights off is displayed.

To turn the headlights off, select "Yes".

If the driver's door is opened after the engine switch is turned off, this suggestion message will not be displayed.

■Customization

Convenience Services (Suggestion function) can be turned on/off.