Toyota RAV4 Quiz
U140f automatic transaxle

Speed sensor

In this manual: U140f automatic transaxle
Introduction — 37Interior — 12Exterior — 432Az-fe engine mechanical — 1552Az-fe ignition — 182Az-fe charging — 232Az-fe emission control — 82az-fe exhaust — 32Az-fe fuel — 72Az-fe lubrication — 4Brake — 17Brake control — 63U140f automatic transaxle — 59Instrument panel — 8Suspension — 18Drive shaft — 23Axle — 6Tire and wheel — 30Air conditioning — 93Lighting — 45Cruise control — 21Differential — 12Door lock — 31Engine immobiliser — 21Horn — 5Can communication — 27Mirror — 5Parking brake — 5Power steering — 27Propeller shaft — 3Seat — 29Seat belt — 27Sliding roof — 25Steering column — 6Wiper and washer — 11Supplemental restraint system — 95Other system — 5Maintenance — 14
27steps
~162min
4/5difficulty
Done 0 of 27
Components
Toyota RAV4. Speed sensor

Removal
  1. Disconnect cable from negative battery terminal
Caution: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  1. Remove battery
  2. Loosen the nut and remove the bolt and battery clamp.
  3. Remove the battery.
  4. Remove the battery tray.
  5. Remove the 4 bolts and battery carrier.
  6. Remove the 2 bolts and battery bracket reinforcement.
  7. Remove speed sensor nt
    Toyota RAV4. Remove speed sensor nt

  1. Disconnect the sensor connector.
  2. Remove the bolt and sensor.
  3. Remove the o-ring from the sensor.
  4. Remove speed sensor nc
    Toyota RAV4. Remove speed sensor nc

  1. Disconnect the sensor connector.
  2. Remove the bolt and sensor.
  3. Remove the o-ring from the sensor.
Inspection
Toyota RAV4. Inspection

  1. Inspect speed sensor nt

Measure the resistance of the sensor.

Standard resistance
  1. Inspect speed sensor nc

Measure the resistance of the sensor.

Standard resistance
Toyota RAV4. Inspect speed sensor nc

Installation
  1. Install speed sensor nc
Toyota RAV4. Install speed sensor nc

  1. Coat a new o-ring with atf.
  2. Install the o-ring to the sensor.
  3. Install the sensor with the bolt.
Torque: 11 n*m (112 kgf*cm, 8 ft.*Lbf)
  1. Connect the sensor connector.
  2. Install speed sensor nt
    Toyota RAV4. Install speed sensor nt

  1. Coat a new o-ring with atf.
  2. Install the o-ring to the sensor.
  3. Install the sensor with the bolt.
Torque: 11 n*m (112 kgf*cm, 8 ft.*Lbf)
  1. Connect the sensor connector.
  2. Install battery
  3. Install the battery bracket reinforcement with the 2 bolts.
Torque: 20 n*m (204 kgf*cm, 15 ft.*Lbf)
  1. Install the battery carrier with the 4 bolts.
Torque: 20 n*m (204 kgf*cm, 15 ft.*Lbf)
  1. Install the battery tray.
  2. Install the battery with the battery clamp.
Torque: 8.5 N*m (87 kgf*cm, 75 in.*Lbf) for bolt 5.0 N*m (51 kgf*cm, 44 in.*Lbf) for nut
  1. Connect cable to negative battery terminal

Test yourself

A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.