U140f automatic transaxle
Transmission oil cooler
In this manual: U140f automatic transaxle
14steps
~84min
3/5difficulty
Done 0 of 14
Components

Removal
Installation



Removal
- Remove transmission oil cooler

- *1: Disconnect the no. 3 Water by-pass hose from the transmission oil cooler.
- *2: Disconnect the no. 4 Water by-pass hose from the transmission oil cooler.
- *3: Disconnect the no. 1 Oil cooler inlet hose from the transmission oil cooler.
- *4: Disconnect the no. 1 Oil cooler outlet hose from the transmission oil cooler.
- Remove the 3 bolts and oil cooler from the bracket.

Installation
- Install transmission oil cooler

- Install the oil cooler to the bracket with the 3 bolts.


- *1: Connect the no. 1 Oil cooler outlet hose to the transmission.
- *2: Connect the no. 1 Oil cooler inlet hose to the transmission.
- *3: Connect the no. 3 Water by-pass hose to the transmission.
- *4: Connect the no. 4 Water by-pass hose to the transmission.
- Add automatic transaxle fluid
- Inspect automatic transaxle fluid
- Inspect the automatic transaxle fluid (see page ax- 102).
- Add coolant
- Add the coolant (see page co-6).
Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?