Seat belt
Terminals of ecu
In this manual: Seat belt
6steps
~36min
2/5difficulty
Done 0 of 6
- Check combination meter assembly
- Disconnect the e19 meter connector.

- Measure the voltage and resistance of the wire harness side connector.

If the result is not as specified, there may be a malfunction on the wire harness side.
- Check heater control panel (for automatic air conditioning system)
- Disconnect the e23 panel connector.

- Measure the voltage and resistance of the wire harness side connector.

If the result is not as specified, there may be a malfunction on the wire harness side.
- Check clock assembly (for manual air conditioning system)

- Disconnect the e22 clock connector.
- Measure the voltage and resistance of the wire harness side connector.

If the result is not as specified, there may be a malfunction on the wire harness side.
Test yourself
A quick Toyota RAV4 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?