Toyota Sienna Quiz
Lighting

Data list / active test

In this manual: Lighting
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
6steps
~36min
2/5difficulty
Done 0 of 6

1. DATA LIST

HINT: By the DATA LIST displayed by the intelligent tester, you can read the value of the switch, sensor, actuator and so on without removing any part. Reading the DATA LIST as the first step in troubleshooting is one of the methods to shorten the labor time.

  1. Connect the intelligent tester to DLC3.
  2. Turn the ignition switch ON.
  3. According to the display on the tester, read the "DATA LIST".

BODY NO.1:

BODY NO.1
BODY NO.1

BACK DOOR:

BACK DOOR

2. ACTIVE TEST

HINT: Performing the ACTIVE TEST using the intelligent tester allows the relay, VSV, actuator and so on to operate without removing any part. Performing the ACTIVE TEST as the first step of troubleshooting is one of the methods to shorten the labor time. The DATA LIST can be displayed during the ACTIVE TEST.

  1. Connect the intelligent tester to DLC3.
  2. Turn the ignition switch ON.
  3. According to the display on the tester, perform the "ACTIVE TEST".

BODY NO.1:

BODY NO.1
BODY NO.1

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.