Toyota Sienna Quiz
2GR-FE Engine control system

Inspection

In this manual: 2GR-FE Engine control system
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
4steps
~24min
2/5difficulty
Done 0 of 4

1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
  1. Resistance inspection
  2. Using an ohmmeter, measure the resistance between the terminals.

    Resistance: 6.9 to 7.9 Ω at 20C (68F) If necessary, replace the camshaft timing oil control valve assembly.

  3. Movement inspection
  4. Connect the positive (+) lead from the battery to terminal 1 and connect the negative (-) lead to terminal 2, and check the movement of the valve.

NOTICE: Confirm that the valve moves freely and does not stick in any position.

If necessary, replace the camshaft timing oil control valve assembly.

HINT: Accumulation of foreign objects causes subtle pressure leaks. The subtle pressure leaks will cause the cam to advance, and this will cause a DTC to be set.

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.