Amplifier Box Speaker Assembly

1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click here

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here

3. REMOVE REAR SEATBACK ASSEMBLY RH

(See page )

4. REMOVE REAR SEATBACK ASSEMBLY LH

(See page )

5. REMOVE LUGGAGE COMPARTMENT SIDE TRAY LH

(See page )

6. REMOVE LUGGAGE COMPARTMENT SIDE TRAY RH

(See page )

7. REMOVE NO. 1 SPEAKER ASSEMBLY WITH BOX

(a) Disconnect the 4 connectors.

(b) Remove the 4 bolts and the No. 1 speaker assembly with box.

1. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX

(a) Install the No. 1 speaker assembly with box with the 4 bolts.

Torque:

8,4 N·m {86 kgf·cm, 74 in·lbf}

(b) Connect the 4 connectors.

2. INSTALL LUGGAGE COMPARTMENT SIDE TRAY RH

(See page )

3. INSTALL LUGGAGE COMPARTMENT SIDE TRAY LH

(See page )

4. INSTALL REAR SEATBACK ASSEMBLY LH

(See page )

5. INSTALL REAR SEATBACK ASSEMBLY RH

(See page )

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click here