Satellite Radio Tuner

1. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(See page )

2. REMOVE NO. 1 NAVIGATION WIRE

(a) Disconnect the 6 connectors to remove the No. 1 navigation wire.

3. REMOVE NO. 1 RADIO RECEIVER BRACKET

(a) Remove the 5 bolts and No. 1 radio receiver bracket.

4. REMOVE NO. 2 RADIO RECEIVER BRACKET

(a) Remove the 5 bolts and No. 2 radio receiver bracket.

5. REMOVE STEREO COMPONENT TUNER ASSEMBLY

(a) Disengage the 2 guides to remove the stereo component tuner assembly as shown in the illustration.

1. INSTALL STEREO COMPONENT TUNER ASSEMBLY

(a) Engage the 2 guides to install the stereo component tuner assembly.

2. INSTALL NO. 2 RADIO RECEIVER BRACKET

(a) Install the No. 2 radio receiver bracket with the 5 bolts.

Torque:

2,5 N·m {25 kgf·cm, 22 in·lbf}

3. INSTALL NO. 1 RADIO RECEIVER BRACKET

(a) Install the No. 1 radio receiver bracket with the 5 bolts.

Torque:

2,5 N·m {25 kgf·cm, 22 in·lbf}

4. INSTALL NO. 1 NAVIGATION WIRE

(a) Connect the 6 connectors to install the No. 1 navigation wire.

5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(See page )