Diagnostic Trouble Code Chart
HINT:
If a trouble code is stored during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to "See page" below.
Transponder Key ECU AssemblyDTC Code | Detection Item | See page |
|---|---|---|
B2780 |
Push Switch / Key Unlock Warning Switch Malfunction |
![]() |
B2784 |
Antenna Coil Open / Short |
![]() |
B2793 |
Transponder Chip Malfunction |
![]() |
B2794 |
Unmatched Encryption Code |
![]() |
B2797 |
Communication Malfunction No. 1 |
![]() |
B2798 |
Communication Malfunction No. 2 |
![]() |
HINT:
The DTCs for the engine immobiliser system are specified below. If other codes are output, check the DTC chart for the SFI system.
ECMDTC Code | Detection Item | See page |
|---|---|---|
B2799*1 |
Engine Immobiliser System Malfunction |
![]() |
B279986*2 |
Engine Immobiliser System Signal (Some Circuit Quantity, Reported via Serial Data) Invalid |
![]() |
B279A*1 |
Theft Deterrent System Communication Line High Fixation |
![]() |
B279A12*2 |
Engine Immobiliser System Circuit Short to Battery |
![]() |
B279C*1 |
Theft Deterrent System Presence Detection |
![]() |
B279C95*2 |
Engine Immobiliser System Incorrect Assembly |
![]() |
- *1: for 2TR-FE
- *2: for 2GR-FKS
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
.gif)