Theft Deterrent System Presence Detection (B279C,B279C95)

DESCRIPTION

If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.

DTC No.	DTC Detection Condition	Trouble Area	DTC Output Confirmation Operation
B279C*1	An ECM that is incompatible with engine immobiliser system is installed.	ECM	Check for DTCs.
B279C95*2	An ECM that is incompatible with engine immobiliser system is installed.	ECM	Check for DTCs.

• *1: for 2TR-FE
• *2: for 2GR-FKS

Vehicle Condition and Fail-safe Operation when Malfunction Detected

Vehicle Condition when Malfunction Detected	Fail-safe Operation when Malfunction Detected
Engine cannot be started	-

Related Data List and Active Test

DTC No.	Data List and Active Test
B279C*1	-
B279C95*2	-

• *1: for 2TR-FE
• *2: for 2GR-FKS

CAUTION / NOTICE / HINT

NOTICE:

• If the ECM is replaced, refer to Registration (See page ).
• After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation".

PROCEDURE

1. CLEAR DTC

(a) Clear the DTCs (See page ).

NEXT

1. CHECK FOR DTC

(a) Perform "DTC Output Confirmation Operation" procedure.

(b) Check for DTCs (See page ).

OK:

DTC B279C*1 or B279C95*2 is not output.

• *1: for 2TR-FE
• *2: for 2GR-FKS

Result

Result	Proceed to
OK	A
NG (for 2TR-FE)	B
NG (for 2GR-FKS)	C

A

USE SIMULATION METHOD TO CHECK

B

REPLACE ECM

C

REPLACE ECM