Cruise Control
Dtc Check / Clear
In this manual: Cruise Control
~1min read
DTC CHECK / CLEAR
CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Radar Cruise 1*1 / Trouble Codes.
(e) Enter the following menus: Powertrain / Radar Cruise 2*2 / Trouble Codes.
(f) Check for DTCs.
Click here .gif)
- *1: Stored in the ECM
- *2: Stored in the millimeter wave radar sensor assembly
CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Radar Cruise 1*1 / Clear DTCs.
(e) Enter the following menus: Powertrain / Radar Cruise 2*2 / Clear DTCs.
(f) Clear the DTCs.
- *1: Stored in the ECM
- *2: Stored in the millimeter wave radar sensor assembly
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?