Vf2cm Transfer
Invalid Data Received From Vehicle Dynamics Control Module (U0416)
In this manual: Vf2cm Transfer
~1min read
DESCRIPTION
PROCEDURE
This DTC is detected if a wheel speed malfunction signal is sent from the skid control ECU (brake actuator assembly).
DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
U0416 |
Invalid Data Received From Vehicle Dynamics Control Module |
|
|
RECONFIRM DTC
(a) Clear the DTCs (See page
).
(b) Check if the same DTCs are output (See page
).
Result | Proceed to |
|---|---|
DTC U0122 and U0416 are output |
A |
Only DTC U0416 is output |
B |
DTC is not output |
C |
| A | ![]() |
GO TO DTC U0122 |
| B | ![]() |
CHECK BRAKE CONTROL SYSTEM |
| C | ![]() |
USE SIMULATION METHOD TO CHECK |
Test yourself
A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?
.gif)