Toyota Tacoma Quiz
Ac60e Automatic Transmission / Transaxle

On-vehicle Inspection

In this manual: Ac60e Automatic Transmission / Transaxle
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
ON-VEHICLE INSPECTION PROCEDURE

1. INSPECT PARK/NEUTRAL POSITION SWITCH

(a) Apply the parking brake.

(b) Turn the ignition switch to ON.

(c) Depress the brake pedal and move the shift lever to any position other than P.

(d) Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in other positions.

(e) Check that the back-up light comes on and the reverse warning buzzer sounds when the shift lever is in R, but the light and buzzer do not operate in other positions.

If a failure is found, check the park/neutral position switch for continuity.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.