Removal

1. REMOVE TRANSMISSION INSULATOR RH (for 2GR-FKS)

2. REMOVE TRANSMISSION INSULATOR RH (for 2TR-FE)

3. SEPARATE WATER BY-PASS PIPE (for 2GR-FKS)

(a) Remove the 2 bolts to separate the water by-pass pipe from the automatic transmission assembly.

4. REMOVE PARK/NEUTRAL POSITION SWITCH

(a) Disconnect the park/neutral position switch connector.

(b) Using a screwdriver, pry out the lock washer.

(c) Remove the nut and lock washer.

(d) Remove the bolt and park/neutral position switch from the automatic transmission assembly.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.