Toyota Tacoma Quiz
Other System

Rear Power Outlet Socket

In this manual: Other System
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
0102030405054N·mlb·ft
Tightening torque found on this page
Components COMPONENTS ILLUSTRATION ILLUSTRATION ILLUSTRATION Installation Installation INSTALLATION PROCEDURE

1. INSTALL POWER OUTLET SOCKET ASSEMBLY

(a) Install the clamp.

(a) Install the clamp.

(b) Connect the connector.

(c) Using a torx socket wrench T30, install the 4 screws and the power outlet socket assembly.

Torque:

5 N·m {51 kgf·cm, 44 in·lbf}

NOTICE:

Install the screws in the order shown the illustration.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

Removal REMOVAL PROCEDURE

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE POWER OUTLET SOCKET ASSEMBLY

(a) Using a torx socket wrench T30, remove the 4 screws.

(a) Using a torx socket wrench T30, remove the 4 screws.

(b) Disconnect the connector.

(c) Remove the clamp and the power outlet socket assembly.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.