Toyota Tacoma Quiz
Ac60e Automatic Transmission / Transaxle

Reassembly

In this manual: Ac60e Automatic Transmission / Transaxle
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
010203040506.45N·mlb·ft
Tightening torque found on this page
REASSEMBLY PROCEDURE

1. INSTALL SHIFT SOLENOID VALVE SLT

(a) Install the shift solenoid valve SLT and straight pin to the transmission valve body assembly.

2. INSTALL SHIFT SOLENOID VALVE SL2

(a) Install the shift solenoid valve SL2 and straight pin to the transmission valve body assembly.

3. INSTALL SHIFT SOLENOID VALVE SL1

(a) Install the shift solenoid valve SL1 and straight pin to the transmission valve body assembly.

4. INSTALL SHIFT SOLENOID VALVE SL3

(a) Install the shift solenoid valve SL3 and straight pin to the transmission valve body assembly.

5. INSTALL SHIFT SOLENOID VALVE SLU

(a) Install the shift solenoid valve SLU and straight pin to the transmission valve body assembly.

6. INSTALL SHIFT SOLENOID VALVE SL4

(a) Install the shift solenoid valve SL4 and straight pin to the transmission valve body assembly.

7. INSTALL SHIFT SOLENOID VALVE SL

(a) Install the shift solenoid valve SL and straight pin to the transmission valve body assembly.

Torque:

6,4 N·m {65 kgf·cm, 57 in·lbf}

8. INSTALL SOLENOID LOCK PLATE

(a) Install the solenoid lock plate to the transmission valve body assembly with the 3 bolts.

Torque:

6,4 N·m {65 kgf·cm, 57 in·lbf}

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.