Audio, Visual, Telematics

Blind Spot Monitor Slave Module (C1AB7)

~1min read

DESCRIPTION

This DTC is stored when the blind spot monitor sensor LH detects an internal malfunction.

DTC Code

DTC Detection Condition

Trouble Area

C1AB7

The blind spot monitor sensor LH (slave) detects an internal malfunction.

Blind spot monitor sensor LH

NOTICE:

When checking for DTCs, make sure that the blind spot monitor system is turned on.

PROCEDURE

  1. CHECK DTC

(a) Clear the DTCs (See page ).

(b) Recheck for DTCs and check if the same DTC is output again (See page ).

OK:

No DTCs are output.

OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE BLIND SPOT MONITOR SENSOR LH