Lost Communication with Blind Spot Monitor Slave Module (U0232)
DESCRIPTIONThis DTC is stored when the blind spot monitor sensor RH judges that there is a communication problem with the blind spot monitor sensor LH.
WIRING DIAGRAM
NOTICE:
HINT:
PROCEDURE
(b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(c) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(b) Disconnect the blind spot monitor sensor RH connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(b) Disconnect the blind spot monitor sensor LH connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|


