If the pulse sensor built into the power window regulator motor malfunctions, the power window control system enters fail-safe mode.
(a) The power window control system prohibits the following power window operation when the pulse sensor for the jam protection function has problems and the window position or the learned value is abnormal.
Power Window Control System
Power Window Operation
Ignition Switch ON
Key-Off
(Within Approximately 45 Seconds after Ignition Switch Turned Off)
Key-Off
(After Approximately 45 Seconds Elapsed after Ignition Switch Turned Off)
Manual UP
Operation prohibited
Operation prohibited
Operation prohibited
Manual DOWN
Operative
(Jam protection not operative)
Operation prohibited
Operation prohibited
AUTO UP
(hold switch at AUTO UP position)
Operative
(in MANUAL mode)
(Jam protection not operative)
Operation prohibited
Operation prohibited
AUTO UP
Operation prohibited
Operation prohibited
Operation prohibited
AUTO DOWN
Operation prohibited
Operation prohibited
Operation prohibited
HINT:
When the pulse sensor is normal, the AUTO UP/DOWN function can be resumed by deactivating fail-safe mode. To deactivate fail-safe mode, pull up the power window switch to the AUTO UP position and hold it for at least 1 second to fully close the window from the fully open position.
(b) If the LIN communication line malfunctions (communication stop), the power window control system prohibits the following operations.
Master Switch
Power Window Operation
Ignition Switch ON
MANUAL UP
Operative (Jam protection operative)
MANUAL DOWN
Operative (Jam protection not operative)
AUTO UP (hold switch at AUTO UP position)
-
AUTO UP
-
AUTO DOWN
-
HINT:
Remote up/down function does not operate.
Power Window Regulator Switch (for Front Passenger Side)